Save Thresholds on System management page

[AndriusZ]

I'd like to configure performance thresholds for system components like cpu, physical drives and so on.
But when I slide threshold "cursor" to position and press "save thresholds" after page reload all my cursors stay on the previos positions.

[tmagee]

Things to consider checking (and seaching on the board)
- if you're logged on with full privileges
- can e.g. the disk thresholds be altered via SIM to set / clear disk thresholds on the unit you're monitoring and does this change where the scroll bars are set
- a community string set up to be read & write (this may need only done on the SIM server but might need done on the unit you're monitoring too)
- trust certificate set up (though this will only affect setting via SIM)

[AndriusZ]

there was a problem with SNMP security. My units have SNMp read-only access so threshold could not save.

[Haridas]

SNMP community strings should be set to "Read-write" for the Threshold settings to work.

[Rob Buxton]

I've seen this behaviour.
Drag the Cursors across to where you want them, hit Save and then reload the page by re-using the file system space used link.

I found this behaviour in the 7.20A Agents.

If you can move the slider bars then your SNMP settings are correct, if you don't have the Read/Write set then they're not able to be moved and you don't get the Save Threshold button.