Server Management - Systems Insight Manager
1830044 Members
5563 Online
109998 Solutions
New Discussion

SIM & ILO Inconsistent

 
Steve_576
Frequent Advisor

SIM & ILO Inconsistent

I am running the latest SIM and have the latest drivers & firmware loaded for the ILOs in (3) DL380G4s (1) DL380G5 and all the ILOs in SIM have these same effects.

On my SIM server if I go to systems by type and look at all servers my (4) servers with ILOs show up. Sometimes the MP (Management Processor) column indicates a green check for all good and sometimes a blue i for no management processor found.

My trouble is that the blue i is wrong - my ILO is still fully functional yet SIM is reporting it as not there.

Second part of this is if I view by system type and look at all management processors, they are all green checks in a good status - even when systems by type- all servers says they are not there.

Anyone else run into this and fix it?

I previously had an issue where all my ILOs were constantly switching from reachable/unreachable events but an update to the Network COnfiguration Utility cured this.

The constant switching between present and not present is that same kind of effect.

5 REPLIES 5
iamunson
New Member

Re: SIM & ILO Inconsistent

I too have been seeing this on our DL360 and DL380 servers. We did a fresh install of SIM 5.1 SP1. After discovering the servers, the iLO status appears to be inconsistent from one day to the next. Not only for regular rack-mount servers but for blades as well. Sometimes the servers will show up as being part of the enclosure and sometimes they won't. These are BL25P G1 blades.
I have also gone through the process of updating management agents and firmware, but to no avail.
Steve_576
Frequent Advisor

Re: SIM & ILO Inconsistent

Thanks for the reply!

Sorry you have the same issue, but glad to know it isn't just me :)

Paul_627
Frequent Advisor

Re: SIM & ILO Inconsistent

I have 3 DL380G5 w ilo fw v 1.29 and 2 BL25p G1 AMD64 ilo fw 1.29 with the same issue. SIM is v 5sp1. Agents are v 7.80.
Paul_627
Frequent Advisor

Re: SIM & ILO Inconsistent

Just upgraded the ilo fw to 1.30 on the above and 1.91b on another. No change.
Steve_576
Frequent Advisor

Re: SIM & ILO Inconsistent

Well, my issue seems to be solved. I thought I did this already but with everything I did on my previous issue maybe I didn't do it after the NCU updated solved my other issue -
Deleted the ILO's and servers they were in from SIM

Ran a manual identify and discovery.

All seems well now.