SIM and BLADE Enclosures

[Asif Bashir]

Hi,

I have 3 blade enclosures and a 1u power enclusure.

When i run a discovery on SIM some of the blade servers (16 BL20p's and 8 BL25p's)are shown with the right association the the enclosure they belong to. There are some which have no association.

How can i manually associate the servers? or do i need to upgrade a particulare firmare. If so how?

Many thanks

[Terence Ng]

I have also came across the same problem that can be fixed by searching the said server record and then deleting it. After deletion, manually add the server record again (Options -> Discovery -> Manual)

[Asif Bashir]

Thanks for the reply.

I tried this, but it has not worked.

I am in the process of upgrading the ILO FW, Rack FW and Switch Firmware.

Then i will remove the blades and rediscover.

A HP engineer send me a .bin file to update the ilo a while back, do you know where i can down load this type of file?

[David Claypool]

Go to http://www.hp.com/servers/swdrivers and get the Component Pack. When you execute it, select the Extract option to get the .bin file.