SIM Discovery question

[Jeff S._1]

I have a quick (and perhaps silly) question in regards to disovery in SIM 5.2 SP2 (Windows). When we receive a rack of blades it appears SIM is finding the hosts via the name that comes from the factory but we're not seeing the "real" host name in SIM after our final build out. Do I need to remove the existing host in SIM so it discoverts the new one?

[Jeff S._1]

It appears the task is failing. These are the HP RGS workstations (bl wx460c). Time to investigate further.

Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
Received a response from the system management homepage, this system supports SMH.
Checking for WBEM support on system.
This system does not have any SMI-S CIMOM installed
This system doesn´t have a server CIMOM installed locally, or cannot connect to it using all credentials specified
Running WBEM rules based identification.
Cannot get ComputerSystem WBEM/WMI data from the system
Running VM Identification
The system is not a VMware ESX Host, or WBEM credentials may not be specified, skipping VM Identification
Running WS-Man identification.
The system did not respond to WS-Management, verify credentials.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System does not have the SNMP ProLiant Server (foundation) agents installed.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
No matching SNMP System Type Manager rule was found.
Checking for DMI protocol support.
The system does not have Windows DMI support.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The SSH protocol is not supported on this system
Running Storage identification.
Did not detect WBEM support on this system. Will not attempt storage identification. If this is a storage host, check WBEM credentials and make sure the providers and CIMOM are operational on the host.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
Checking if this system is supported by Insight Power Manager.
Insight Power Manager is not supported.
Running VM identification.
System did not pass discovery filter, not added.