HPE Community
Server Management - Systems Insight Manager
1830845 Members
2563 Online
110017 Solutions
New Discussion

System Type Unmanaged

 
Cynthia Huang
Occasional Advisor

‎08-11-2004 12:44 AM

‎08-11-2004 12:44 AM

System Type Unmanaged

I am just getting started with implementing SIM and I noticed that after the automatic discovery, some servers were listed as unmanaged. I looked at a few of them and they have at least v.6.4 of the foundation pack and have management agents installed. Is there something that I'm missing?
0 Kudos
Reply
2 REPLIES 2
Ivan KOVAC
Respected Contributor

‎08-11-2004 01:16 AM

‎08-11-2004 01:16 AM

Re: System Type Unmanaged

Hello

Check if managaments agents and SNMP is starting under services. As well chech SNMP settings.

Ivan
0 Kudos
Reply
David Claypool
Honored Contributor

‎08-11-2004 02:31 AM

‎08-11-2004 02:31 AM

Re: System Type Unmanaged

"Unmanaged" means that HP SIM hasn't been able to determine after a series of interrogatories that a management protocol it recognizes is running on the machine. Presuming everything is fine on the targets (assuming you have checked everything, including community strings), debug the network connection. Is there something in the path between the two of them that could be blocking traffic?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.