Temperature thresholds

[Neil Innes]

Can anyone tell me what the ambient temperature thresholds are for a DL 380 G5? I would like to see a trap when the temperature reaches some predetermined value but before a system shutdown is initiated. From the System Management Homepage, it seems that the only configurable option is to continue or to shutdown when the critical temperature is reached.

Thanks in advance for any info on this.

[Daniel Leblanc · Accepted solution]

YEs you could creat on event and tell it to select the item(use event attributes that I will specify )> then select EVENT TYPE...IS..they're you get many selection from degrade FAN..Degrade temputure..MANY look at every one for you're best choice.

DOn't ferget to apply you're points please .FYI:it at every message next to DATE and TIME ,it set at UNASSIGNED.

have a nice day!!

Dan

[Neil Innes]

Thanks Dan... Would you happen to know what the actual temperature settings are? It appears that a shutdown will occur at 39 C but I can't find other thresholds i.e. where a warning would be sent. I'm being asked for specifics and, so far, I can't find any.

Thanks again...

[Daniel Leblanc]

http://www.teramach.com/media_lib/documents/12559_na.pdf

Page 27

check the document you also have for hard drive..

[Igor Karasik]

Good threads regarding temperature thresholds in Proliant servers:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=974709
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=940582