upgrade firmware ILo problem

[remy_4]

Hi
Configuration : 10 Blades BL30P in 1 enclosure
I have upgrade firmware of 8 ILo in 1.7 but 2 are now unreachable.
I can't ping them.
I don't know what's happen and the Led "Fault" of Management module is red.
someone can help me
Thanks

[Mike Strako]

If you can T/S into the blades, here are some sample scripts you can use to default the iLo's back to. Once the iLo's are defaulted or properly configured usually the management faults clear up.

Here's the link.
http://support.microsoft.com/default.aspx?scid=kb;en-us;327153

[remy_4]

Hello
I don't understand the link between Ilo's firmware and microsoft.
Sorry

[Mike Strako]

I'm sorry, wrong link. Here is the correct one. :-)

http://h18023.www1.hp.com/support/files/server/us/download/22183.html

[remy_4]

thanks for the link but I can't ping ILO and I can't connect to it.

Regards

[Mike Strako]

Are the servers configured, meaning an OS on it and Terminal services installed?

[remy_4]

Yes, server (BL30P)is configured, o.s is Windows 2003 server.
Before upgrading ILo's firmware in 1.7 (old firmware was 1.62), all was OK.

[Mike Strako]

Good, then you can use the scripts to help configure your iLo's. You can set networking settings, users, names Etc. Let me know if you need more assistance.

[remy_4]

Yesterday, HP has changed the management module et I reboot the enclosure
All is OK now :)

Thanks for yur help

[Hochmuth_1]

I have the same Problems with our DL380G3 und DL360G3. Also Firmware 1.75 for ILO didn't solve the Problems. All ILO Components are shown at the Managementhomepage as "failed".

HP replaced the hole ILO-modules?