Version Control Agent Problem

[Scott Dawson_1]

Hello,

when trying to access the VCA I get the following message.
"Not enough storage is available to process this command"

What does this mean ??

[David Claypool]

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=402388

[Scott Dawson_1]

Okay cured that problem with your help ...thanks.
Created an admin equivalent now get the following message when going from a VC client to the VCM.
So yet again am stuck !!.

Scott.



No inventory information is available to obtain a list of Support Packs from. A valid Version Control Repository Manager that contains one or more Support Packs must be configured before a Reference Support Pack may be selected. If you have just selected a repository, please wait a few minutes and then refresh this page.

[Alexander Haugk]

you can download the PSP from hp.com and upload it manualy. after this process, you will see a support pack and VCRM will update it by itself...

[Scott Dawson_1]

I have the latest PSP installed on the server, however the machine with the VCM is actually a workstation running windows 2000 server, is this the problem ?.

[Alexander Haugk]

you have to download the PSP and upload it to the VCM. the VCM need this PSP as reference.

[Alexander Haugk]

i use VCM on a d530 with WinXP SP2 (with patched connection limit). when you upload the psp to the vcm via webinterface, it will build its first repository. i think this is needed to function in order.