Code : 0168 when starting a hp g8 ml310e

[eagleclo]

Hello,

I have a ML310e Gen8 server and it decided fail to POST after starting the server.

It turns on for ~5 seconds, where I can see it's still only at 10% of the POST, doing CPU initialization. The Code at the bottom right of the screen reports 0168.
and Hear the sound of a continuous pep And then a black screen.
Thank you for your help.

[rabindra11sharm]

Dear eagleclo 

Error code : 0168  - used for Memory initialization issue. Please remove all DIMMs, clean it properly as well as DIMM slots. connect Memory one by one, and power on.  if there is multiple memory installed. if only single memory, then check it once, and replace it if not powering on.

Hope, I could provide you with clear and helpful instructions. If you have any more questions or need further assistance, don't hesitate to ask. I'm here to help!

Have a great day!!

[eagleclo]

@rabindra11sharm 

Thank you for the answer, I tried it on tge server but it didn’t work.

Regards
Jean B

[rabindra11sharm]

Dear  eagleclo

Can you please let me know, how many DIMMs and which slot it installed. 

[eagleclo]

Sorry for the very late answer.
Actually I tried with 1/2/3/4 DIMMs and in all the slots but still the same error.

[rabindra11sharm]

Dear eagleclo

It might be the issue with Memory, Please replace it. Please check Server Quick Spec page no 18 for memory details given below.

HP ProLiant ML310e Gen8 QuickSpec : https://www.hpe.com/psnow/doc/c04128120

Hope, I could provide you with clear and helpful instructions. If you have any more questions or need further assistance, don't hesitate to ask. I'm here to help!

Have a great day!!