Servers - General
1870471 Members
3208 Online
110549 Solutions
New Discussion

Re: Compatible hard drives

 
RafaelVelvaz90
Visitor

Compatible hard drives

Hello, I have a question. I have these two HDDs:

Dell 400-ATKJ and Dell 400-AUST

I would like to install them in my HPE ProLiant ML30 Gen10 Plus server. I want to know if they are compatible, as I plan to use them in a RAID 1 array with Intel VROC. Has anyone tested this, or can I use them without any issues?

 

Thanks

1 REPLY 1
Azr_geek
Honored Contributor

Re: Compatible hard drives

Hello @RafaelVelvaz90,

The Dell 400-ATKJ and 400-AUST drives will probably work in your HPE ProLiant ML30 Gen10 Plus and should be suitable for a RAID 1 array using Intel VROC, since both are 2 TB, 3.5-inch SATA drives running at 7,200 RPM. However, HPE has not officially tested or approved these exact Dell models, so compatibility cannot be guaranteed. Make sure they are connected directly to the server’s SATA ports or backplane, not through a Dell PERC controller, and check that they fit the HPE drive carriers. For a home lab or non-critical system, you can try using them together, but for production or important data, two identical HPE-qualified drives would be the safer choice.

Regards,
Azr_geek