disk change

[sombemile]

Good evening, I have a HP proliant ml 310e gen8 server with a B120i disk controller with 4 non-hot-pluggable disks (bay 1 1TB, bay 2 500GB, bay 3 1TB and bay 4 500GB) I have configured a raid 10 and currently the disk on bay 2 is down. I would like to change the disk with a 1TB disk. What should I do to not lose my data?

[prajwal_ds · Accepted solution]

Hi @sombemile ,

Before replacing the disk please check if the disk is supported by the the server and then you have to take back up of RAID configuration and data before replacement.

Hope this information has helped you, Please click on the "Thumbs Up/Kudo" icon as a token of appreciation. Also, if this post has helped to solve your issue, consider marking this as an "Accepted Solution".

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".