HPE Community
Servers - General
1847292 Members
2389 Online
110263 Solutions
New Discussion

Re: does not start HP Intelligent Provisioning

 
forella
Occasional Contributor

‎02-23-2021 07:40 AM - edited ‎02-23-2021 11:27 PM

‎02-23-2021 07:40 AM - edited ‎02-23-2021 11:27 PM

does not start HP Intelligent Provisioning

there is a dl360p gen8 server which has HP Intelligent Provisioning issue freezes on startup. see the screenshot for details.
I tried different IP firmware from 1.62 to 1.72, the result is the same, at 1.62 it hangs on a white screen with the inscription wait 127.0.0.1.

 
0 Kudos
Reply
1 REPLY 1
Sebasbin
HPE Pro

‎03-03-2021 02:04 AM

‎03-03-2021 02:04 AM

Re: does not start HP Intelligent Provisioning

Hi forella,

Requesting you to restore the system default settings using the BIOS utility (F9).
>>Upgrade the server BIOS and ILO firmware to the latest versions
>>Then try to re install or upgrade the intelligent provisioning by using different versions(refer-https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c03458406)
>>If the issue persist ,i would suggest to log a support case with HPE for further investigation ,including log analysis.



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.