error when creating a raid on my server

[Lukas4545]

Hello i just recently bought and installed a proliant ml110 gen11 server and everything went fine. But when i tried setting up my first raid(RAID1 between 2 ssd's) i got this error:
500 - ("status"-"fail" "message""Internal Server Error" "data" "bytes' object has no attribute 'encode'","code*:500}.

what do i do?

thank you for your help in advance

[Suman_1978]

Hi,

As its a new server did you contact HPE Support for help?

Where are you getting this error?
Intelligent provisioning
Smart Storage Administrator

Thank You!
I work with HPE but opinions expressed here are mine.

[Lukas4545 · Accepted solution]

Hello, yes it was a new server and i got some help from a friend and he solved it apperently there were was another section in the Intelligent Provisioning to create raids and i used the wrong one. Still, thank you for the reply!

[Sunitha_Mod]

Hello @Lukas4545,

Perfect! 

We are glad to know the problem has been resolved and we appreciate you for keeping us posted. 

[NAHC]

May I ask you how you were able to setup the RAID. I am getting the same error on a brand new server. Have installed storage controller MR408i-o. Thanks

[Lukas4545]

I already wrote the solution in a comment on this post. It was a long time ago and i am not really sure anymore, but i think i used a different opten for raid. there are 2 different ones where you can make a raid.

[NAHC]

I figured it out. In system utilities select system configuration, use MR storage administrator to create the RAID.