HPE Dynamic Smart Array B140i SATA RAID Controller Driver for Red Hat Enterprise Linux 8.7

[NickBlack]

Does anyone know when the updated B140i storage driver for RHEL 8.7 is going to come out? It's almost been a month since 8.7 was released and doesn't look there's an updated driver yet.

8.6 driver is here: https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_347dd71b29b14152809e47e376

Saved search term is here: https://support.hpe.com/connect/s/search?language=en_US#q=B140i%20SATA%20RAID%20Controller%20Driver%20for%20Red%20Hat%20Enterprise%20Linux%208&t=DriversandSoftware&sort=relevancy&numberOfResults=25

[support_s]

System recommended content:

1. Advisory: HP ProLiant SL4540 Gen8 Server - HP Dynamic Smart Array SATA RAID Controller Driver for Red Hat Enterprise Linux (HPVSA_DD) Driver Disk Does Not Load During Installation of Red Hat Storage Server 3.0 in an HP ProLiant SL4540 Gen8 Server

2. Red Hat Enterprise Linux 6 - Providing Driver Diskette for HP Smart Array B110i SATA RAID During Installation

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Bunsol]

First check if the server supports RHEL 8+ in the below link:-

https://techlibrary.hpe.com/us/en/enterprise/servers/supportmatrix/vmware.aspx#ml

We will have to wait for the driver if and when released.

[NickBlack]

It's been supported all the way from 8.0-8.6 (see link in my original post)

[Bunsol]

The driver has not been released for 8.7. We request you to either wait for the driver to be released if and when HPE tests and releases the same. However if it is very urgent then please log a support ticket so that this can be looked forward by the concerned team.