iLO sensor temperature

[kaiserclaw]

Hello. 

We have an ML350 gen8 and in iLO we have a high temperature reading on 15-VR P1.

What is this sensor?

Thank you.

[support_s]

System recommended content:

1. Advisory: ProLiant SL390s G7 Server - HP Integrated Lights-Out 3 (iLO 3) Web Interface May Display the Value of Temperature Sensor 15 (IOH2) as Zero (0) Degrees Celsius

2. Advisory: ProLiant SL250s Gen8 Server - Critical Thresholds in System Information Temperature Are Displayed in Integrated Lights-Out 4 (iLO 4) as "N/A" for Some Sensors

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[kaiserclaw]

Thank you. We already applied patch.

"On a ProLiant SL250s Gen8 server, Critical Thresholds in System Information Temperature for sensors 02 to 17 are displayed as "N/A" in HP Integrated Lights-Out 4 (iLO 4)."

We have a reading of 65 degrees. This is the highest of all sensors. Everything else is around 30 degrees.

Where is this sensor located?

[Sebasbin]

Hi,

15-VR P1 sensor is for  Voltage regulator processor 1 zone .Its on system board 

[Lyke69]

---

@kaiserclaw wrote:

Hello. 

We have an ML350 gen8 and in iLO we have a high temperature reading on 15-VR P1.

What is this sensor?

Thank you.

---

On a ProLiant SL250s Gen8 server, Critical Thresholds in System Information Temperature for sensors 02 to 17 are displayed as "N/A" in HP Integrated Lights-Out 4 (iLO 4).

[Lyke69]

---

@kaiserclaw wrote: MyLowesLife

Hello. 

We have an ML350 gen8 and in iLO we have a high temperature reading on 15-VR P1.

What is this sensor?

Thank you.

---

It tends to hover around 70-80 degrees Celsius.