VMware driver for Smart Array P222 controller

[hlefranc]

Hello,

I would like to configure an external Smart Array P222 controller plugged to HP Microserver Gen8 using VMware 7.

Is it possible? 

If yes, could you please provide me the link where I can find the VMware driver?

Regards,

[Mamatha_J]

Hi @hlefranc 
Yes, it is possible to configure a Smart Array P222 on a HPE ProLiant MicroServer Gen8 running VMware ESXi 7, provided you meet several requirements.
Obtain the correct driver/firmware: On HPE’s product support page for the MicroServer Gen8 (Drivers & Software tab) you can access HPE’s driver catalogue for your ESXi version.
Ensure your controller (P222) is supported in your ESXi version – users report success with ESXi 7.0.
Use an HPE customised ESXi image or HPE offline bundle which includes the Smart Array driver, generic VMware image may not include the correct HPE driver.
Update firmware/BIOS on both the MicroServer and the P222 controller before integration.
After installation, configure your RAID volumes via HPE’s Smart Storage Administrator (SSA) (or equivalent) and confirm they appear properly in ESXi as datastores. 

[support_s]

System recommended content:

1. HPE ProLiant MicroServer Gen8 - Product Information Reference | HPE Storage controllers

2. HPE Data Agile BURA Compatibility Matrix - Sept 2016

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Mamatha_J]

Hi @hlefranc 
If you find the reply helpful, please consider clicking on the "Thumbs Up/Kudo" icon.

Thanks & Regards,

Mamatha Ajaraddi

[Rajaram02]

Hi hlefranc
You can download the vib for 7.x from below link
https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-191698dcecb7439e&tab=revisionHistory
Also the ESXi 7.0 has the driver inbox 
https://compatibilityguide.broadcom.com/detail?program=io&productId=20948&persona=live