Adding ports to protocol VLAN on PC8212ZL

[Mali Medo]

I have problems adding untagged ports to protocol VLAN on 8212ZL switch.
When I try to add untagged prot to VLAN I got message
Cannot add more protocols (Max number reached).
This is happening only to one VLAN. When I try to add the same port to different VLAN there is no error.
This VLan I have problems with has 67 untagged ports.

[Shadow13]

Can you please paste the config from the switch and also if possible get also get the output for "show log"

[Mali Medo]

Hi, attached you can find config file.
In show log there is no errors regarding this.
When you try to add ports to vlan in command line it says "Cannot add more protocols (Max number reached".

[Mali Medo]

HI now I can not change port assignement in vlans. I put ou of the vlan one port and tried to put it into another vlan and got message max protocols reached.
There is any log in sho log command.
Is there any news about this problem this is anoying.

[bobby lee_1]

I had the similiar problem and finally I found solution:
www.sipVoipSdk.com

[Mali Medo]

I found workaround. Removed one protocol from VLAN and then I could add port.