HPE Community
Windows Server 2003
1833461 Members
2997 Online
110052 Solutions
New Discussion

Swapping drives

 
TLM66
New Member

‎06-07-2006 01:55 PM

‎06-07-2006 01:55 PM

Swapping drives

Instead of ghosting my Citrix server, I would like to remove the 2nd drive from the mirror set of my first citrix server and use it to boot off the second server. What do I need to do to make this work at the hardware level. Both servers are the same make and model with same firmware versions.
0 Kudos
2 REPLIES 2
Igor Karasik
Honored Contributor

‎06-07-2006 11:02 PM

‎06-07-2006 11:02 PM

Re: Swapping drives

If you use hardware RAID (by using SmartArray controller) - you don't need to do nothing.
Just swap drives.
0 Kudos
Sheldon Smith
HPE Pro

‎06-09-2006 02:36 AM

‎06-09-2006 02:36 AM

Re: Swapping drives

Of course to get a clean copy, I would recommend rebooting the source system and removing one of the mirror spindles during the initial BIOS load....

Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.