Posted to: HPE OneView
7 hours ago We use the primary network card for ILO communication and a second one for management access (WebUI). We had a static route on both of them. After the update, both static routes were gone and I had to add them back via Rest-Api. Very unpleasant. Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello! I was wondering if you guys had any advice for a predicament I've found myself in.The situation:I am trying to set up a HPE DL20 Gen10 server, and for whatever reason, it will not accept drives installed without ramping up the fans to jet-engi... Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago Hello,I have an older Proliant DL160 G6 with 2x 300GB drives in RAID 1One of the drives (Bay 2) started showing a predictive failure alert recently so I've been attempting to get it replaced. I have 2 3TB drives that I opened and tried to use to repl...
Posted to: ProLiant Servers (ML,DL,SL)
11-23-2025 HP DL580 G9 experienced a power failure, causing the server to crash directly. All four power supplies were connected, but there was no redundancy. PSU1 malfunctioned, causing the server to crash directly Posted to: ProLiant Servers (ML,DL,SL)
12-15-2025 Dear Forum members,My trusty old ML350P G8 have been reporting WHEA "Fatal hardware error" in the event viewer. I have been trying to find out what sort of error this is by using Microsoft memory test software, by running a benchmark software that te... Posted to: ProLiant Servers (ML,DL,SL)
6 hours ago I would like guidance as to how I can go about installing the HPE MR416i-o Gen 11 x16 Lanes Cache OCP SPDM Storage Controller (P47781-B21) into an HPE Proliant DL380 Gen 11 Server (P58417-B21). I have already gone ahead and inserted the card into the...
Posted to: ProLiant Servers (ML,DL,SL)
08-28-2020 Hello! This is my first time posting here. I'll try to keep things to-the-point.I recently purchased a ProLiant DL580 G7, and was hoping to use an SSD with it. The drive in question is a WD Blue 3D NAND 500GB SATA SSD. It's currently plugged into one... Posted to: ProLiant Servers (ML,DL,SL)
3 weeks ago Good dayWe have 4 HPE ProLiant DL560 gen10 servers with ESXI installed. Recently we determined that in one server all physical disks and RAID are in Degraded (Not authenticated) status. They are functioning normally and working, but this error...All... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Unable to turn proliant server on
Posted to: ProLiant Servers (ML,DL,SL)
7 hours ago We have a strange problem here... (HPE 12TB SATA-6G, 653948-001, HGST HUH721212ALE604)Customer's DL360 Gen10 failed all 4 12TB SATA drives in RAID 0+1. We tried to re-enable the logical drive with no success. So finally we replaced all 4 drives with ...
