Posted to: HPE Alletra Storage
27m ago Good day all,I have an Alletra 6010 Volume that got corrupted due to unexpected power failures. If I present the volume to the Hyper-V (ISCSI) it shows up under the disk manager as (RAW). I cloned a shapshot and presented the clone - without any prob... Posted to: ProLiant Servers (ML,DL,SL)
yesterday The MCP repository (eg. for RHEL 10 but not only there) contains outdated ssacli and ssaducli 6.45-8.0. Current is 6.60.8.0, two versions newer. Please update the repository contents and think about an automated synching mechanism with the normal sup...
Posted to: HPE 3PAR StoreServ Storage
Tuesday Hello Team,Recently we had a disk failure on 3PAR 8400. The disk with pdid 124 was in failed state and we replaced it with a new diskthe new disk received a pdid of 34 and the service mag process could not be completed and the state as degraded. We a... Posted to: ProLiant Servers (ML,DL,SL)
yesterday While searching for a firmware update, I found that the original download link on the support site: https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_86ca636bf11c42bdaabcb9638f it no longer available and now returns a de... Posted to: MSA Storage
yesterday Hello all,I am trying to map port A3 and B3 on MSA 2060 to All/Any initiators which might try to connect. In the old GUI, this was easy, however in the new one I only see the option to add unmapped initiators or create hosts from unmapped initiators....
Posted to: ProLiant Servers (ML,DL,SL)
a week ago We have a strange problem here... (HPE 12TB SATA-6G, 653948-001, HGST HUH721212ALE604)Customer's DL360 Gen10 failed all 4 12TB SATA drives in RAID 0+1. We tried to re-enable the logical drive with no success. So finally we replaced all 4 drives with ... Posted to: Insight Remote Support
02-26-2013 As other users reported, initial 'check connectivity' works (HP Connection Status: Connected), but the Register Hosting Device repeatedly fails after 60 seconds with this error: "Unable to register with HP"The log file UCARegistrationError_MsgId........ Posted to: HPE Synergy
yesterday Please could someone let me know where to download service pack for synergy 480 g10? When I try to serach, it takes me to the following linkService pack for HPE ProLiant Gen10 and 10 Plus | HPE SupportPlease confirm
Posted to: HPE Synergy
a week ago Notice: HPE Synergy - Deprecating Delivery of New HPE Synergy Custom Images and Certified Vendor Add-onsI looked through this notice and I'm trying to understand the reason behind this change. In my environments with Synergy, the Certififed Vendor Ad... Posted to: ProLiant Servers (ML,DL,SL)
yesterday The FAN1 is running permanently at 100% speed, even though iLO reports values fluctuating between 20% and 25%.I have tested the fan itself by connecting it to the FAN2 header, where it behaves normally and is properly regulated. However, when any fan...
