Posted to: ProLiant Servers (ML,DL,SL)
a week ago We have a strange problem here... (HPE 12TB SATA-6G, 653948-001, HGST HUH721212ALE604)Customer's DL360 Gen10 failed all 4 12TB SATA drives in RAID 0+1. We tried to re-enable the logical drive with no success. So finally we replaced all 4 drives with ...
Posted to: Insight Remote Support
02-26-2013 As other users reported, initial 'check connectivity' works (HP Connection Status: Connected), but the Register Hosting Device repeatedly fails after 60 seconds with this error: "Unable to register with HP"The log file UCARegistrationError_MsgId........ Posted to: HPE Synergy
2 hours ago Please could someone let me know where to download service pack for synergy 480 g10? When I try to serach, it takes me to the following linkService pack for HPE ProLiant Gen10 and 10 Plus | HPE SupportPlease confirm
Posted to: HPE Synergy
a week ago Notice: HPE Synergy - Deprecating Delivery of New HPE Synergy Custom Images and Certified Vendor Add-onsI looked through this notice and I'm trying to understand the reason behind this change. In my environments with Synergy, the Certififed Vendor Ad... Posted to: MSA Storage
2 hours ago Hello all,I am trying to map port A3 and B3 on MSA 2060 to All/Any initiators which might try to connect. In the old GUI, this was easy, however in the new one I only see the option to add unmapped initiators or create hosts from unmapped initiators.... Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago The MCP repository (eg. for RHEL 10 but not only there) contains outdated ssacli and ssaducli 6.45-8.0. Current is 6.60.8.0, two versions newer. Please update the repository contents and think about an automated synching mechanism with the normal sup... Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago The FAN1 is running permanently at 100% speed, even though iLO reports values fluctuating between 20% and 25%.I have tested the fan itself by connecting it to the FAN2 header, where it behaves normally and is properly regulated. However, when any fan... Posted to: ProLiant Servers (ML,DL,SL)
6 hours ago HelloPlease help to make it possible that HP ProLiant ML350 G6 Server will power off completely automatically.Right now Windows Server 2003 SP2 can't do that, so after all have to push the button manually.I wasn't installed and configured everything ...
Posted to: HPE 3PAR StoreServ Storage
Tuesday Hello Team,Recently we had a disk failure on 3PAR 8400. The disk with pdid 124 was in failed state and we replaced it with a new diskthe new disk received a pdid of 34 and the service mag process could not be completed and the state as degraded. We a... Posted to: Servers - General
8 hours ago Greetings,I am trying to understand whether my Microserver Gen8 has a NIC firmware update available.On the Gen8 download page I downloaded a "Gen9 only" update which thankfully checked for hardware before applying. However, I found two firmware on th...
