Posted to: MSA Storage
23m ago Hello,We have a storage system equipped with 16 x 3.3TB SSDs and 2 x Fibre Channel controllers.Each controller is connected to two SAN switches via 4 Fibre Channel ports.Four ESXi hosts access the storage system via the SAN switches, each with one 32...
Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago We just got a brandnew DL380 Gen12 and I'm struggling a bit with the new iLO password policy.As usual we reset everything to factory defaults (BIOS and iLO) and give the iLO our new internal standard password. The first hurdle was that the password m... Posted to: HPE Nimble Storage Solution Specialists
yesterday I have HPE Nimble Message: The "array" certificate has expired on 2026-01-31. How can I renew it? I tried cert --gen array --force but get ERROR: Array certficate generation failed: Error Loading extension section v3_reqThanks, Posted to: HPE Morpheus VM Essentials
4 hours ago Hi,I'm testing HPE VME as an alternative for VMware. for some time now. I created VMware templates for Windows Server 2019, 2022 and 2025 and tested migrating VM created from these VM's. Windows Server 2019 and 2022 do run fine, but the Windows Serve... Posted to: ProLiant Servers (ML,DL,SL)
yesterday Hey guys,i inherited a DL360 Gen 10 with a Xeon Silver 4208 (8 Core) and would like to upgrade the system to a 16 Core CPU, e.g. the Xeon Gold 5218 with 125 Watt TDP or the Xeon Silver 4216 with a TDP of 100 Watts.(both are listed in the Quickspecs i...
Posted to: HPE Synergy
yesterday Notice: HPE Synergy - Deprecating Delivery of New HPE Synergy Custom Images and Certified Vendor Add-onsI looked through this notice and I'm trying to understand the reason behind this change. In my environments with Synergy, the Certififed Vendor Ad... Posted to: Operating System - VMware
Wednesday Hello,I'm currently in the process of setting of zerto and have successfully installed zerto replication appliance on each host, no errors at all within the actual appliance. However, when I go to create a VPG I don't see any of my vms. I see my data... Posted to: ProLiant Servers - Netservers
01-03-2026 Hi,I try to revive a NetServer LC with 5/75 processor card. Unfortunately I do not have the original case and PSU. Got the MB, CPU card, riser board and front IO panel. I found a compiled service manual containing 10 pages about the LC model but no ... Posted to: Operating System - HP-UX
Tuesday Hi,I'm trying to boot from the primary on a HP 9000 C110. It recognizes the boot drive but I get the following error:========================================Boot IO Dependent Code (IODC) revision 0Failed I/O operation withENTRY_IOStatus = -1300000000... Posted to: HPE Morpheus VM Essentials
yesterday I have encountered an interesting issue in my test environment where I am unable to create the following configuration that is listed in the HPE VME 8.0.12 documentation (The HPE VME version is 8.0.12):https://support.hpe.com/hpesc/public/api/documen...
