Posted to: MSA Storage
3 hours ago I have an MSA2060 FC, with two FC ports on each controller, and i want to know what is the correct way to cable to MDS-9148S switches.Should i connect Controller A --> Switch A and Controller B --> Switch B, or i should split each controller over two... Posted to: HPE Morpheus VM Essentials
2 weeks ago I have a problem; I have some VMs:And I'd like to install the agent on them so I can report the IP addresses and such, but every time I try, it crashes, and I don't know why: Posted to: Servers - General
13 hours ago Setup: DL380 Gen 11 with E208e-p SR Gen 10 card and one D3610 drive enclosure.Connections are:- E208e-p:port 1E (top port) is connected to D3610:I/O B (bottom):p1- E208e-p:port 2E (bottom port) is connected to D3610:I/O A (top):p1Following observatio...
Posted to: Software - General
10 hours ago Managing firmware updates across large-scale infrastructure has traditionally been a complex, manual, and error-prone process. As organizations scale to thousands of servers, ensuring firmware compliance while maintaining operational efficiency becom... Posted to: HPE Morpheus VM Essentials
10 hours ago I'd like to try migrating two of my servers that are on a cluster: So, here's the new cluster to try out Ceph: So I'm not really sure which method is the right one to use Posted to: HPE Morpheus VM Essentials
11 hours ago Hello,I have an issue in VME 8.0.1 with the Manager network config after a HA Failover.When I do a HA failover test by shutting down the host where the manager runs, the manager restarts automatically after some time on a different host but loses its... Posted to: ProLiant Servers (ML,DL,SL)
13 hours ago Hi,I have a DL580 Gen9 system that is out of support now but was working fine for months. Now it started to shut down with System Power Fault Detected (XR: 10 A2 MID: FF 0F F0 00 00 FF 3F 0D 0D 04 04 0D 0D 0D 0D 06 06 06 06 06 06 06 06 06 06 06 06 06... Posted to: HPE Synergy
14 hours ago I have an existing server profile template with three server profiles associated to it. I need to apply a different network configuration to one of the server profiles using a copy of the same template.What I have done so far:Copied the existing serv... Posted to: Servers - General
14 hours ago Hi all, I have a ProLiant 360 G10 with RAID Controller P408i-a SR, Firmware 7.81.The drive has 3 logical drives configured but only 1 logical drive can be Cache enabled. Why?All disks are SSDs.The cache enabled drive is RAID1. Another RAID1 and a RA... Posted to: ProLiant Servers (ML,DL,SL)
Friday On March 27th HPE released SPP 2026.03.00.00 for Gen10, Gen11 and Gen12.And has also released a new OEM Addon v12.3.0 for ESXi 8.0U3, filename HPE-803.0.0.12.3.0.6-apr2026-Addon-depot.zip, for Proliant.The current latest "Valid-vLCM-Combos.pdf" docum...
