HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Array Setup and Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

In Guest iSCSI setup on vSphere

 
SOLVED
Go to solution
boerlowie42
Advisor

In Guest iSCSI setup on vSphere

Hi,

i'm about to set up networking for in guest SCSI (on Linux VMs) running on vSphere.

My idea is to give the VM 2 vNICs where one has a pNIC active on Fabric A (we're running on UCS) and the other on Fabric B.  Now for a vmKernel setup, we need to set the 'not-active' adapter to Unused on the portgroup.  But for an in-guest iSCSI setup, it's not really clear to me if this is also the case.for in Guest SCSI.  I found some documentation for Equalogic devices where they set the not-active NIC to 'Standby'.

Does anybody have guidance on how to set this up on Nimble?

Thanks!

1 REPLY
rfenton4
Honored Contributor
Solution

Re: In Guest iSCSI setup on vSphere

Hi Sammy,

Take a look on InfoSight for KB-000157 - Configuring ESX for VM's with direct attached LUNs

This will walk you thru it - I'd post the KB here but for version control it will be better to reference the one on InfoSight - the  reference above is a direct link

Let us know if you have any issues

Cheers

Rich