Cannot get Admin access via web on HP Procurve 2530

[rhauk68]

I cannot get admin access via the web interface and I need this to work. I usually use other methods but I happen to need this on this switch.

I used to know where to turn this on but I cannot remember for the life of me.

I know this is just a simple thing in console. Help Guys?

[Anuragt85]

For the web management interface, you should have read access by default. When you hit login, the same credentials you use for SSH should work.  default username should be manager.

you can reset the password from the command line, but if you can use SSH, it should be the same user/password combination.

> conf t

# password manager user-name admin

#Wr

should prompt you for a new password