Flow control and Jumbo Frame - HP 5412zl to Dell EqualLogic PS6100

[MichaelRicardo]

Hello,

I am configurtating new switch (a replacement - Brocade) - to HP 5412zl.

Brocade is currently connected to 4 x  Dell EqualLogic PS6100 - each has 2 controlelr and 4 ports for iscsi traffic - uses mpio for multiple data streams.

The controllers are setup with active passive configs.

JumboFrame is turned on globallhy on Brocade but on HP can not be done. Hence I'll have Jumbo enabled on VLAN for SAN And Servers. I don't see flow control of such on Brocade but I read you need to enable flow control on ports that carriy iSCSI traffic. 

Any comments?

Michael