Aruba & ProVision-based

Re: HP ProCurve 2810-24G - cannot kill ssh sessions

 
EugeneAlekseev
New Member

HP ProCurve 2810-24G - cannot kill ssh sessions

Hello everyone.

I have an connecting issue to my HP ProCurve 2810-24G (FW version - N.11.15) . When I try to open SSH-session switch says to me that "Maximum number of sessions are active".

I connected to switch via console cable and tried to use "kill" command, but sessions didn't killed (i verify it using "show ip ssh" command - number of sessions didn't changed). Them, I tried to use SMNP to clear the sessions (using this instuction), but it also didn't work - TCP connections are disappear, but SSH sessions are not.

Using connection-timeout also didn't kill current SSH sessions.

My outputs:

sh ip ssh

  SSH Enabled            : Yes
  TCP Port Number        : 22
  Timeout (sec)          : 120
  Secure Copy Enabled    : Yes

  Ses Type     | Protocol  Source IP and Port
  --- -------- + --------- ---------------------
  1   console  |
  2   ssh      | SSH v2    <my IP addr>:41790
  3   ssh      | SSH v2    <my IP addr>:50109
  4   ssh      | SSH v2    <my IP addr>:1907

walkmib 1.3.6.1.2.1.6.13.1.1

tcpConnState.0.0.0.0.22.0.0.0.0.0 = 2
tcpConnState.0.0.0.0.23.0.0.0.0.0 = 2
tcpConnState.0.0.0.0.80.0.0.0.0.0 = 2
tcpConnState.0.0.0.0.1506.0.0.0.0.0 = 2
tcpConnState.0.0.0.0.1513.0.0.0.0.0 = 2
1 REPLY 1
parnassus
Honored Contributor

Re: HP ProCurve 2810-24G - cannot kill ssh sessions

What's about trying this: http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=376300&amp;docId=emr_na-c03148060&amp;docLocale=en_US

A note: mate, N.11.15 was released on October 2008...isn't the right time to update your Switch to latest software version available at present date (N.11.76 February 2017)?

I'm not an HPE Employee
Kudos and Accepted Solution banner