HP switches VLAN ACLs

[Paul707]

Hi,

am currently testing with two switches HP 2530-48G J9775A (which are layer 2) some ACLs between three different VLAN (VLAN 10, 20 and 30). I'm trying to configure in both switches ACLs that can filter access between the VLAN individually for this:

- VLAN 10 and 20 can interact with each other and VLAN 30 is isolated but is still existent in both switches and evidently is in the trunk link.

If you have an idea on how the configuration would look like and would like to answer, I would really appreciate it !

Thank you very much