BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G1 - No scsi controller on reboot

Jase4772
Regular Advisor

BL460c G1 - No scsi controller on reboot

Hi,

We have 3 or so Blades that when we reboot them (for whatever reason) they sometimes just go to PXE boot and can't see the e200i controller.

I can get round this by using the iLO to power the unit off and back on but is this a known issue and fixable?

Thanks
Jase
2 REPLIES
JKytsi
Honored Contributor

Re: BL460c G1 - No scsi controller on reboot

What firmwares are in use
ILO,OA,server bios, smart array ?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
Adrian Clint
Honored Contributor

Re: BL460c G1 - No scsi controller on reboot

The connector for the mezz card that the drivers and arrary controller connect to the main board with may need reseating as well.
Push hard on the yellow sticker or blue plastic bit.