BladeSystem - General
1748021 Members
4921 Online
108757 Solutions
New Discussion

Automated collection of HBA/NIC firmware/driver information from blades.

 
schmu56
Occasional Contributor

Automated collection of HBA/NIC firmware/driver information from blades.

Hello:

 

I have been asked to report against a client's blade infrastructure, and had used HPSUM to gather enclosure and base blade FW information.  I need to go deeper and get the FW/driver versions for any HBA and LOMs.  I have tried to use HPSUM for this but seem to only get the high-level enclosure/blade info.  My questions are:

 

1. Is it possible to automate the collection of this information using HPSUM?

2. If it is possible, is it dependent upon the current firmware in the enclosure (ie. 2 year old FW does not support providing that information).

3. Will it collect from all OS types (ESX, Windows, HP-UX, etc.).

 

Thanks!