Procurve 6120G/XG - XFP does not light

[Marcos_Max]

The company where I work bought a HP C7000 server and have a switch ProCurve 6120G / XG.
We have Cisco SFP and XFP to use 10G. XFP-10GLR OC192SR SFP and SFP-10GLR Class 1.( https://imgur.com/a/Lze0oWc )
The SPF is used in a RB 1036 Mikrotik. In Mikrotik SFP appears Tx and Rx signal, but the ProCurve 6120G / XG keeps giving as down the interface.
We have tested different SFP and different network cables. We tested to enable the network port.
The RJ-45 ports are working normally. We tested other switches also Procurve 6120G / XL and did not work the same way.
We've done several tests, but none managed to operate the XFP, someone can say what can I be doing wrong or is something missing?
I appreciate the help

Procurve 6120G/XG Firmware Version: Z.14.58 1

[AmRa · Accepted solution]

Hi

As per HP 6120G/XG Blade Switch QuickSpecs(Page Number 10), only HP supplied XFP modules will operate in the HP 6120G/XG switch. Hence if possible please test with HP supplied XFP modules

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04123275

XFP to SFP+ Cables HP X244 XFP SFP+ 1m Direct Attach Cable J9300A
HP X244 XFP SFP+ 3m Direct Attach Cable J9301A
HP X244 XFP SFP+ 5m Direct Attach Cable J9302A

XFP Options HP 850nm Short-range 10 Gigabit Small Form Factor Pluggable Module Option Kit 443756-B21
NOTE: Each kit contains a single 850nm SR XFP fiber module. Only HP supplied XFP
modules will operate in the HP 6120G/XG switch.

HP 1350nm Long-range 10 Gigabit Small Form Factor Pluggable Module Option Kit 443757-B21
NOTE: Each kit contains a single1310nm LR XFP fiber module. Only HP supplied XFP
modules will operate in the HP 6120G/XG switch.