BladeSystem Virtual Connect
cancel
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect FC modules when you reset/reseat the Virtual Connect Enet module?

chuckk281
Trusted Contributor

Virtual Connect FC modules when you reset/reseat the Virtual Connect Enet module?

Steinar had a customer question:

 

****************

 

 

We have a question from a customer who has some error messages on one of his VC-Enet modules, and has been told by HP Support to reset/reseat that VC-Enet module.

 

Obviously he will lose the ethernet connection on the NIC connected to the VC-Enet module that he resets/reseats, which is OK since he has Ethernet teaming enabled in the OS, but he is more concerned about his SAN disks.

 

So his question is: Will the reset/reseat of a VC-enet module affect the VC-FC modules in the enclosure, or can he expect both of the VC-FC modules to function as usual during the VC-Enet reset/reseat?

 

*****************

 

Mark replied:

 

******************

 

He should expect both VC-FC modules to function as normal during a reset/reseat operation of a VC Ethernet module.

 

***************

 

Any experience with this? Please let us know.