HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
BladeSystem Virtual Connect
Showing results for 
Search instead for 
Did you mean: 

Virtual Connect shared uplink set (SUS) question.

Trusted Contributor

Virtual Connect shared uplink set (SUS) question.

Justo had a Virtual Connect question:




Hopefully a quick question.. I have a customer that wants to create a LACP shared uplink set on a 1/10Gb-F VC module to aggregate the 4 x 10/100/1000BASE-T ports + the 2 x 1GbE SFP ports = 6Gb LACP set.


I’m nearly sure that we can do this but haven’t been able to find any documentation that explicitly states so.  Is this doable?




Mark replied:




Yes, Virtual Connect will support forming a 6Gb aggregation with these ports as long as they are all running the same speed/duplex.




Are you using LACP and SUS to get increased bandwidth? Share with us as to how it is working for you.