HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

4500 Simple VLAN Configuration

 
gfisaris
Occasional Visitor

4500 Simple VLAN Configuration

Hello 2 all!



I recently was asked to configure a 3com 4500 26ports.


I was asked to setup 3 vlans with dhcp.



Here's what i did:



1) Create vlans


2) add ports to vlans


3) set port 1 as trunk and also added as tagged to all vlans





At port 1 i connect my adsl modem router (dhcp enabled).


4500 switch gets 192.168.1.100 as it's ip


but all other computers can't get their ip by the dhcp if they are connected via 4500 switch..





any thoughts ?


sorry for my poor english..