HPE Community
Comware Based
1829103 Members
2319 Online
109986 Solutions
New Discussion

Add subnet to existing vlan on 5500

 
Tom-HNNCSB
New Member

‎04-29-2011 08:32 AM - last edited on ‎11-27-2013 12:32 AM by

‎04-29-2011 08:32 AM - last edited on ‎11-27-2013 12:32 AM by

Add subnet to existing vlan on 5500

Hello,

 

I added a second subnet to an existing VLAN.  I need this since I want to increase my DHCP addresses without changing the existing configration of the current subnet on the same vlan.

 

The dhcp server is on the same vlan.  On a second NIC, I gave it a static IP of the new subnet.  I configured the DHCP scope for the new subnet and activated it.  I disactivated the old scope to force new dhcp addresses from the new scope.

 

However, machines are not getting addresses.  But I can ping the dhcp server new IP address fine from the old network. 

 

Suggestions?

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based to Comware-Based.- Hp Forum Moderator

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.