Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Add subnet to existing vlan on 5500

 
Tom-HNNCSB
Occasional Visitor

Add subnet to existing vlan on 5500

Hello,

 

I added a second subnet to an existing VLAN.  I need this since I want to increase my DHCP addresses without changing the existing configration of the current subnet on the same vlan.

 

The dhcp server is on the same vlan.  On a second NIC, I gave it a static IP of the new subnet.  I configured the DHCP scope for the new subnet and activated it.  I disactivated the old scope to force new dhcp addresses from the new scope.

 

However, machines are not getting addresses.  But I can ping the dhcp server new IP address fine from the old network. 

 

Suggestions?

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based to Comware-Based.- Hp Forum Moderator