Baseline SW 2948-SFP Plus and 10/100 PXE boot

[pascalek]

Hi!



I tried to boot disk less stations through the network and found that Baseline Switch 2948-SFP Plus have problems with booting those computers which have 10/100 MBit interfaces. All computers with 1000 Mbit are working fine.



I tried at least software version: 01.00.07 and 01.00.09.



Hadrware is:

Hardware Version: 1.0.1

Boot Version: 00.00.13



tcpdump shows that there is no packets send to server.

I tested following 10/100 MBit NICs:

- 3com 3C905C-TX-M

- VIA VT6103 10/100 Mb/s Fast Ethernet PHY

- RealTek RTL8100B 10/100Mb/s PCI LAN



Any ideas?

Regards,

Rafal Cygnarowski