HPE Community
Comware Based
1827702 Members
3126 Online
109967 Solutions
New Discussion

Enable Routing

 
IanUK
Occasional Advisor

‎06-19-2012 04:01 PM

‎06-19-2012 04:01 PM

Enable Routing

Hello,

 

I have a site where they have a HP Procurve 5406zl and they are on a totally flat network (i.e. no vlans, no routing etc), all there switches are connected via the uplinks on vlan 1.

 

I plan to re-do there network soon but wanted to try and do some bits in the background on the core, IP Routing is turned off at present but I wanted to know if I enabled IP Routing will this have any issues on the network?

0 Kudos
1 REPLY 1
manuel.bitzi
Trusted Contributor

‎06-19-2012 10:37 PM

‎06-19-2012 10:37 PM

Re: Enable Routing

If you only enable routing, there's no impact. But it is up to you what you configure next. :-)

H3CSE, MASE Network Infrastructure [2011], Switzerland
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.