Comware-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change member priority of IRF, After change system require to reboot?

jetsettronn
Occasional Advisor

How to change member priority of IRF, After change system require to reboot?

The system configure same priority as belows;

Switch  Role   Priority  CPU-Mac         Description
   1   Slave   1         b8af-672f-835e  -----
 *+2   Master  1         b8af-6729-652a  -----
   3   Slave   1         b8af-6729-676a  -----
   4   Slave   1         b8af-6736-739a  -----

I need to change Member priority of IRF, I can user CLI > irf member 2 priority 31 ?

If yes, the system require to reboot?

 

Thank you.

1 REPLY
Highlighted
parnassus
Honored Contributor

Re: How to change member priority of IRF, After change system require to reboot?

Since a change of IRF Member's priority shall affect the IRF Master election result on the next election event not causing an immediate Master (re)election...I think that if you commit the irf member 2 priority 31 command it will only change the IRF Member 2's priority from 1 (default value) to 31 (higher value -> with respect to other default values - 1 - you're making more probable that IRF Member 2 will be (re)elected Master, if possible and if necessary) and nothing else to running IRF.