Switch Interface Port security

[Muthukumar1]

Hi Team,

          Could advise Intrerface port secrity configuraion on HPE 5900/HPE 5945 switces, can avoid geting entire infra loop instead of particular port disable/block.Please suggest on this.

Thanks

Muthukumar

[-Alex-]

Hello Muthukumar1,

Could you please clarify what exactly you need to secure.

There are a lot of option and combinations. It could be prot security or if you want to prevent loops there are also additional  features.

[Muthukumar1]

Hi team,

         we need If any kind of loop occur in Infrastructure that particular port only should be disable instead of affact entire infra. 

[-Alex-]

Hello  Muthukumar1,

You may check the following link it is good for edge ports:

https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0115932

1. system-view
2. loopback-detection enable
3. loopback-detection multi-port-mode enable
4. interface interface-type interface-number
5. loopback-detection enable
6. loopback-detection control enable
7. loopback-detection per-vlan enable
8. loopback-detection action { no-learning | semi-block |
shutdown } Optional.

For the other uplink ports you may use STP or Thrill depending on your needs. 

Hope this helps!

[Muthukumar1]

Hi Team,

      Ok and could you suggest on uplink port like as HPE switch to oter OEM switches when not availble birdge aggregation.

suupose if bridge aggregation configured while connecting  with oter OEM switches , hope any other inteface port security confifuration not required..