cancel
Showing results for 
Search instead for 
Did you mean: 

ocd ip address

SOLVED
Go to solution
ITeam
Super Advisor

ocd ip address

The entry in DP quotes one ip address but when I run /etc/dpp /etc/ddfa/dp the ocd created has a different address to that in the dp file ? ps -ef | grep ocd shows this.
Any ideas gratefully accepted.
3 REPLIES
Fred Martin_1
Valued Contributor

Re: ocd ip address

Have you changed the dp file without rebooting, or restarting ddfa?

Make sure /etc/rc.config.d/netdaemons
contains: export DDFA=1
and try:
# /sbin/init.d/rbootd stop
# /sbin/init.d/rbootd start
# /sbin/init.d/ddfa start
fmartin@applicatorssales.com
Ray Krupinski_1
Occasional Contributor

Re: ocd ip address

This is what I do you don't have to rebootNote: Check for the existance of the OCD daemon:
rdtclist -d | grep dtcOWR1 | awk '{print $2}'
where "dtcOWR4" is the DTC name,
then ps -ef | grep 10.244.160.25

1) Make a backup copy of the dp file
bmoc cp /etc/ddfa/dp /etc/ddfa/dp.$( date +%m%d%y )

2) Create a new dp test file with the dtcname, board, and port (ie: /dev/pdOWR4b1p8 )
bmoc vi /etc/ddfa/dp.

3) Execute the Dedicated Port Parser (/usr/sbin/dpp) to scan your new /etc/ddfa/ file. This starts up the ocd daemon and assigns the dedicated ports for Telnet Port Identification. A warning at this point is OK.

bmoc /usr/sbin/dpp /etc/ddfa/DTC name -k

Example:
WARNING: Device file not specified in /dev/telnet
Many commands (such as ps) may not display the correct device file in their output

Task completed with:
0 port identification entries created
1 ocd pseudonyms removed
1 ocds started
Solution

Re: ocd ip address

Thanks for the replies - I (strangely enough) seem to have resolved the problem by removing spurious leading zeroes from the ip addresses ... Eg; 126.000.000.012 becomes 126.0.0.12 ... Hmmmmm!
I had already checked the ocd and dpp and found no problems with it - either when rebooting server or simply restarting the dpp and re-scanning the dp file.
Paul.