Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring Array with SCU

Ayman Altounji
Valued Contributor

Configuring Array with SCU

I am trying to configre a 3200 array in a DL580 using the Compaq System Configuration Utility floppies.
I created the SCU disks from Smartstart 5.1
I boot up from SCU Disk 1 and follow the menus to System Configuration, Disk Array Configuration, and it then asks for the Array Configuration Utility Disk. I insert ACU Disk 1, which I also created from Smartstart 5.1, and it tells me it will reboot and run the ACU.
After the reboot I get the non-system disk or disk error message as the ACU disk is not bootable!
Is there actually a way of configuring the array without using the CD.

My ultimate goal is to configure the array remotely throught the RIB Lights Out Board, but, for various reasons, I cannot use the Smartstart Scripting Toolkit.

Any help would be very much appreciated.