HPE Community
Disk Enclosures
1754046 Members
2968 Online
108811 Solutions
New Discussion юеВ

Re: Monitoring alarms on XPxxx

 
SOLVED
Go to solution
pakito56
Occasional Advisor

тАО02-10-2011 12:58 AM

тАО02-10-2011 12:58 AM

Re: Monitoring alarms on XPxxx

Hi,

Do you have more documentation about the link between c-track and SIM?

Thanks.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО02-10-2011 01:17 AM

тАО02-10-2011 01:17 AM

Re: Monitoring alarms on XPxxx

IIRC the xp array owners guide has a chapter about this topic.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО02-10-2011 01:26 AM

тАО02-10-2011 01:26 AM

Re: Monitoring alarms on XPxxx

Since you as a user are not allowed to access the SVP directly, there are probably no detailed instructions about c-track on the web. Consider to ask HP support.

Note: Messages are sent to HP via HPSIM, but they dont appear in HPSIM. You may use SNMP traps or command view notifications.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.