P400 Parity Initialization Status - Initialization Failed

[Daniel_zp]

Hello,

I had a power surge and had to replace 2 hard drives in RAID5 array.

After deleting, recreating and rebuilding logical drive, there is no warnings/errors in ACU, but it says:

Parity Initialization Status - Initialization Failed

I've attached a screenshot

http://i.imgur.com/OtLaB3U.png

and ADU report

https://www.dropbox.com/s/h0mur26cqhc8ury/report-408c22a1-00000b14-00000000.zip

What could cause this? Should I be very worried? And how can I fix this?

Thank you in advance.

[AnkitM]

Drive  2I:1:3 and  2I:1:4 multiple instances of Medium Error (0x03) which could be one of the reason for the Logical Drive initilization failure as I see Controller Firmware is up to date and I was unable to find any other errors on a quick glance.

You may contact HP Technical Support to get the disk replaced, if you have a valid entitlement.