Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID Configuration

SOLVED
Go to solution
mehul_3
Regular Advisor

RAID Configuration

Hi there
How we can check which RAID configuration is installed in which drive and how much space is occupied for the same.

Thanks in advance
Mehul
3 REPLIES
Eric Antunes
Honored Contributor

Re: RAID Configuration

Hi Mehul,

Do the following command and check how many physical volumes (PV) (this informations is at the end, under --- Physical volumes ---) you have for each volume groups (VG):

#vgdisplay -v vg00
#vgdisplay -v vg01
...

Best Regards,

Eric Antunes
Each and every day is a good day to learn.
HGN
Honored Contributor
Solution

Re: RAID Configuration

Hi

You can use the vgdisplay command to check the number of Physical volumes are connected

syntax would e vgdisplay -v vgxx

Rgds

Gopi
Hoang Chi Cong_1
Honored Contributor

Re: RAID Configuration


You can verify the RAID level for VA using the Command View SDM software that is installed on your host machine. These are the steps you need to follow:

1. Start the GUI using the /commandview/client/sbin/cmdviewva :

2. Go to Configurations--> General Settings. The subsequent screen displays the current RAID level. The field name is
'Subsystem Level RAID Control:'

You can check how many driver and how much space by using command: vgdisplay
For more detail, see on the manpage.

Hope this helps


Jim
Looking for a special chance.......