Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

XSTM readout and EMC Array

Mike_21
Frequent Advisor

XSTM readout and EMC Array

The readout from xstm shows the following.

PCU Buc adapter
-
Fibre Channel Interface
-
Fibre Channel Driver
-
EMC Array (6)

This would indicate a disk array of 6 disks to form a LUN????

Thanks
3 REPLIES
harry d brown jr
Honored Contributor

Re: XSTM readout and EMC Array

I seriously doubt it, but one way to find out is to run emc's inq utility or one of their other "graphical" utilities.

live free or die
harry
Live Free or Die
Roger Baptiste
Honored Contributor

Re: XSTM readout and EMC Array

To figure out the LUN details of EMC:

use #syminq
or #inq
#symdev
#sympd

This will list the luns seen by the system including their sizes.

The luns are not physical disks , but splits from the physcial disk. The split is done at the EMC level through a bin file. You can look it up using EMC console utility "symmconsole".

The EMC engineer should be able to give you
a hard copy of the binfile layout.

all the emc binaries should be under /opt/emc.
do a find /opt/emc -type d -name bin
and look into bin directories.

HTH
raj
Take it easy.
Sebastien Masson
Valued Contributor

Re: XSTM readout and EMC Array

This is the number of FA seen by all your HBA. So if your Symm as 6 FA connected into a switch or a hub and you have 2 HBA you will see 6 device (is the Volume Logix database, read only hyper) needed by the volume logix client.