cancel
Showing results for 
Search instead for 
Did you mean: 

about HSZ50

leyearn
Regular Advisor

about HSZ50

diskArray :Hsz50
a disk in a unit of RAID5 failed
how can I replace the failed disk with a new one?
thanks
3 REPLIES
Mugilvannan
Valued Contributor

Re: about HSZ50

Refer http://forums1.itrc.hp.com/service/ forums/questionanswer.do?threadId=830228

&

http://forums1.itrc.hp.com/service/ forums/questionanswer.do?threadId=516969

Thanks,
Mugil
If U need a helping hand, U will find one at the end of your arm
Ivan Ferreira
Honored Contributor

Re: about HSZ50

As I don't know your unit policy, you can use this:

>show failed

check the name of the failed disk

>delete failed diskXXX

remove the disk

Insert the new disk

>run config

> add spareset diskXXX
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Thomas J. Harrold
Trusted Contributor

Re: about HSZ50

If you can access the CLI (serial connection), post output from:

show units
show failed
show disks
show raid
show spare

If you have a spare disk, it probably already recovered to the spare disk. Now you have to replace the dead disk, and make that your new hot spare. Alternatively, you can force a "fail back", so the original disk will be live, and your spare will go back to being a hot spare.

-tjh
I learn something new everyday. (usually because I break something new everyday)