EVA 4400 showing nsccondition .........................: failed on a controller

[Michele (Mike) Alberton]

Hi,

got an error on one of our EVA 4400 hoooked up to an rx6600 running HP-UX 11.23.

Running a ls controller full on Controller 2 I got:

operationalstate .....................: failed
operationalstatedetail ...............: initialized_failed
nsccondition .........................: failed


Not sure to which subsystem/component this may refer to within the controller.

Could not find much information on the meaning of each specific entry in the ls controller full output.

Thanks !

Mike