HPE Community
Disk Enclosures
1756747 Members
3257 Online
108852 Solutions
New Discussion

Grouping hosts in P2000 G3

 
mwg
Occasional Advisor

‎03-09-2012 05:26 AM

‎03-09-2012 05:26 AM

Grouping hosts in P2000 G3

I have a quick question regarding hosts in a P2000 G3 SAS array. The P2000 discovers all the hosts, but it lists each host HBA as a separate host. So I have two servers attached to P2000, which appears as 4 hosts in the P2000 GUI.

 

Is it possible to group the hosts in the P2000 GUI so that HBAs for each server are associated with each other? For instance, in the roughly equivalent IBM disk array each HBA is associated with the appropriate host as part of the mapping process. The unit came with a defective controller and I had to work on the project while we were waiting for the new controller to come in, so this could well be user error. But please point me in the right direction.

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-09-2012 11:12 AM

‎03-09-2012 11:12 AM

Re: Grouping hosts in P2000 G3

You probably know this from EVA.

 

It would be a nice feature for P2000 (I set up some hosts with up to 16 FC interfaces each recently), but unfortunatelly the P2000 can't do ...

 

 

:-(

 

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.