Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

In Event Of Failure

Ayman Altounji
Valued Contributor

In Event Of Failure

Currently, we have six drives in the internal cage of an ML370 in a single RAID 5 array. This array also contains the boot partition. In the event our 5304 array controller fails, will we have to rebuild our arrays (and effectively wipe out our data), or can we simply replace the controller upon failure, and just boot up like nothing happened?
1 REPLY
Mark Cloutier
Respected Contributor

Re: In Event Of Failure

If your 5304 fails you will NOT loose your Raid set. Just swap the 53xx and you are good to go. No rebuild necessary as the information is stored in your raid set and not on the 5304.
We are here for a good time, not a long time!